Knowledgebase: Stringer Survey
Setting File New folder and QNEW Drawing Template #
Posted by Jason Coghlan, Last modified by Selwyn Pendergast on 13 March 2020 04:34 PM
If you want to set your AutoCAD Civil3D up so you have the same DWT for every drawing here are the steps Below
  • In explorer go to C:\Users\(jason.coghlan)\AppData\Local\Autodesk\C3D 2012\enu\Template and create a new folder here.
  • Once you have created that folder add the XXX.dwt to it.
  • The go to your options in Civil3D and select the Files Tab
  • Go down to where it says Template Settings, expand that out
  • Expand out Drawing Template File Location - select the location shown and navigate to you folder created above
  • Then expand out Default Template File Name for QNEW , select the DWT below and then set your DWT as the default.

Now every time you do a file new it will open in the folder with just your DWT in it. Also when you select on the QNEW icon in the top right corner to start a new drawing it will always start with the DWT that you have assigned in the options display.

(1 votes)
This article was helpful
This article was not helpful

Comments (0)
Help Desk Software by Kayako support.civilsurveysolutions.com.au/index.php?