Kerb Direction and/or Cul-de-sac Direction is running for Right Hand Drive!
Posted by Shane O'Rorke on 15 February 2011 11:00 AM

Kerb and Cul-de-sac Directions are Wrong.

If you look in the Active Drawing settings the 'Kerb Direction' in the Connection Point Codes tab has been set to CW (clockwise).

The result of this is that all the kerb returns and cul-de-sacs form in a direction matching driving on the right hand side of the road.

Unfortunately this can't be changed once the project has commenced (software locks it in).

This normally means that the Global Settings file is not set to Metric and driving on the left side.  You can fix this for all future project by opening the Global Drawing Settings and doing the following:

- click on the button Set Global Default Settings

- change the selected Global Default Settings file to '1 Metric Units, Left of Centreline (CCW).DEF' - this will mean that future projects create alignments in a better direction.

Version: ARD 2011.11/12 (.Net)
(50 votes)
This article was helpful
This article was not helpful

Comments (0)
Help Desk Software by Kayako support.civilsurveysolutions.com.au/index.php?